How We Repair Your Tanning Bed
Equipment such as tanning beds and air compressors combine motors, electrical controls, lamps or pumps that wear with use.
Common Tanning Bed Problems We Fix
Trips breakers
A short in wiring or a failing motor.
Will not start
A failed switch, timer, capacitor or pressure switch.
Runs but underperforms
Worn lamps, leaks in hoses or fittings, or a worn pump.
Overheats
Blocked cooling, a failed fan or overuse.
Quick Checks Before You Call
These are safe for most owners and sometimes solve the problem without a visit:
- Check the breaker and power cord
- Clean filters and cooling vents
- Drain compressor tanks
Still not working? Call (844) 442-1500 or try our troubleshooting wizard.
Our 5-Step Repair Process
- Call or book onlineTell us what your tanning bed is doing and when it started. We schedule the first available visit.
- DiagnosisThe technician checks power, controls and the parts most likely to fail, using the model's service data and test modes.
- Upfront quoteYou get the cause, the repair and the price before any work starts. If repair does not make sense, we tell you.
- RepairWe install original or equivalent parts matched to your model and clean up when we are done.
- Test and warrantyWe run the appliance through a full cycle to confirm the fix. The repair is covered by our 90-day parts and labor warranty.
Parts We Replace Most Often
- Motors
- Capacitors
- Pressure switches
- Lamps and ballasts
- Timers
- Fans
Cost and Lifespan
Most tanning bed repairs cost $100–$450 including parts and labor, and these appliances typically last 8–15 years. These are national estimates: your exact price comes after the diagnosis. Use the repair vs replace calculator to compare.
Keep It Running Longer
- Replace lamps as a set
- Follow the maker's maintenance schedule
- Drain compressor tanks after use
Tanning Bed Repair in District of Columbia
We repair tanning beds in 1 cities and towns across District of Columbia. Hot, humid summers and cold winters in District of Columbia mean homes across the state appliances deal with both extremes every year.
Frequently Asked Questions
How much does Tanning Bed Repair cost in District of Columbia?
Most tanning bed repairs fall between $100–$450 including parts and labor. The final price depends on the part that failed and your model. You get an exact quote after the diagnosis and before any work starts.
Can you repair my tanning bed today?
Same-day visits depend on technician availability in District of Columbia. Call (844) 442-1500 early in the day for the best chance of a same-day or next-day appointment.
Is the repair guaranteed?
Yes. Parts and labor are covered by our 90-day warranty. If the same problem comes back within that time, we return and fix it.
Which brands of tanning bed do you repair?
We repair all major brands. See the brand list on this page, or call with your model number and we will confirm.
Should I repair or replace my tanning bed?
A tanning bed typically lasts about 8 to 15 years. If yours is well inside that range and the repair costs less than half the price of a new one, repairing usually makes sense. Near the end of its life, or when the repair costs more than half of a replacement, replacing is often the better value. We give you an honest opinion either way.